Model Number: JS1500, JS series-#4728
Brand Name: jianxin machinery
Key Specifications/Special Features:
Description ofCompulsory manual concrete mixer1. JS1500 concrete mixer can mix the plastic and half-dry hard concrete, fluid concrete and light aggregate concrete.2. It is applicable to the common construction working site, road, bridge and each kind of precast product factory.3. It can work independently or be used as facility concrete plant, which is applied with correspond batching machine, adopting new type of aggregate feeding device and mixing blades connection style, they have reasonable structure, high production efficiency, drive reposefully and low noise.Compulsory manual concrete mixer with best price for concrete plantThe JIANXIN concrete mixer is rational in overall design, optimized in performance and convenient for operation and maintenance. It is suitable for all kinds of large, medium and small factories of prefabricated parts as well as industrial and civil construction units to mix all kinds of mortar and dry concrete, plastic concrete, fluid concrete and lightweight aggregate concrete.Working principles (1) Concrete mixer during operation to check at any time to listen to the motor reducer, transmission gear is normal.(2) To touch or test temperature bearings and the motor is too high. View reducer whether there leakage.(3) Pay attention to the mixing device is functioning properly, and the blade cannot shovel piece loose.
(4) Concrete mixer water system shall be able to work effectively, the occurrence of leakage cannot, or cannot control the amount of water.
(5) Check the discharge port of the switch device is working, if not working properly should immediately carry out maintenance.
Advantages ofcompulsory manual concrete mixer
1. Twin shaft forced concrete mixeris available not only in mixing dry harden concrete but also light aggregate concrete. In this way, concrete can be evenly mixed and achieve strong mixing effect.
2. With discharging outlet installed under the bottom of mixer, it can achieve material discharging byair cylinder.
3. Long service lifespan.
4. Applied with imported units and mixing cylinder with dimension of half diameter of the spindle type ones with the same volume, its blade rotating speed is slower than half of spindle type ones. Thus, the blade and lining plate of this type is in small wear intensity and long service life.
Maintenance
1. Correct movement and transport from the design perspective, concrete mixer dragged move only suitable for short-range. From transport and towing speed requirement is very slow, the general provisions shall not exceed 15 - 20km/h, on the uneven road speed should be reduced. In tow line must pay great attention hopper whether hanging hooks firmly fixed wheel flange bolts are loose, to avoid accidents. If long distance moving, use a car load transport is appropriate.
2. Properly installed
(4) Concrete mixer water system shall be able to work effectively, the occurrence of leakage cannot, or cannot control the amount of water.
(5) Check the discharge port of the switch device is working, if not working properly should immediately carry out maintenance.
Advantages ofcompulsory manual concrete mixer
1. Twin shaft forced concrete mixeris available not only in mixing dry harden concrete but also light aggregate concrete. In this way, concrete can be evenly mixed and achieve strong mixing effect.
2. With discharging outlet installed under the bottom of mixer, it can achieve material discharging byair cylinder.
3. Long service lifespan.
4. Applied with imported units and mixing cylinder with dimension of half diameter of the spindle type ones with the same volume, its blade rotating speed is slower than half of spindle type ones. Thus, the blade and lining plate of this type is in small wear intensity and long service life.
Maintenance
1. Correct movement and transport from the design perspective, concrete mixer dragged move only suitable for short-range. From transport and towing speed requirement is very slow, the general provisions shall not exceed 15 - 20km/h, on the uneven road speed should be reduced. In tow line must pay great attention hopper whether hanging hooks firmly fixed wheel flange bolts are loose, to avoid accidents. If long distance moving, use a car load transport is appropriate.
2. Properly installed
Model | JS1500A | |||
Deliverycapacity | 1500L | |||
Through-putcapacity | 2400L | |||
Theoreticalproductivity(m3/h) | ≤90 | |||
Maximumaggregatesize | ≤60/80 | |||
Timeofworkingcycle(s) | 60 | |||
Mixingblade | Speed | 19.5r/min | ||
Number | 2×8 | |||
Mixingmotor | Model | Y180L-4 | ||
Power | 2×22kw | |||
Winchmotor | Model | YEZ180L-4 | ||
Power | 15kw | |||
WaterPumpmotor | Model | 50DWB20-8A | ||
Power | 2.2kw | |||
dimension | transportationstate | 4720*2200*3000 | ||
Workingstate | 95530*3400*10860 | |||
Totalweight(kg) | 11130 |
Shipping Information:
- FOB Port: Qingdao
- Lead Time: 1 - 15 days
- Dimensions per Unit: 4.72 × 2.2 × 3 Meters
- Weight per Unit: 111300 Kilograms
Main Export Markets:
- Asia